Sun ECK FLAG Manual De Instrucciones página 74

UNITS OF MEASURE
From the SETUP MENU, select UNITS OF MEASURE and the following screen is displayed:
Select the unit of measurement to change, then select between international system (SI),
imperial system units (IMP) and US customary system (US).
NOTE: current unit of measurement is indicated by black background
Press to confirm. The machine will reboot to update measure units.
QUICKSETUP
The first time the machine is used, a quicksetup guide appears: the operator is guided through
the steps described at the start of the PRELIMINARY OPERATIONS section. The quicksetup
can also be found in the SETUP MENU, select QUICKSETUP.
The user will be guided through the following steps:
 Language
 Measure units
 License plate recording
 Date and time
 Setup header print
 Vacuum settings
 Leak check test
 Tank filling
Follow the instructions displayed. At the end of the procedure, press ENTER to print a
summary report of the guided procedure. Press ESC to exit.
NOTE: If the guided procedure is not completed, it will be displayed again the next time the
machine is switched on.
NOTE: To display the QUICKSETUP at any time, select from the menu of the same name
under SETUP.
The following screen is displayed:
INSTRUCTIONS MANUAL
SETUP / UNITS OF MEASURE DD/MM/YY XX:XX PM
SI IM
Pressure bar
Weight g
Temperature °C
Volume ml
DD/MM/YYYY –XX:XX
Date-time
QUICKSETUP / LANGUAGE DD/MM/YY XX:XX PM
English
French
German
Spanish
Portuguese
-73-
US