Publicidad
Idiomas disponibles
Idiomas disponibles
Fig.198 Ceiling installation
20
3000
500
5.9.2
Accessing the hanger
Fig.199
1
3
5.9.3
Suspending the unit
7800852 - v02 - 10052022
500
MW-6070074-01
1. Slide the suction grid fixing knobs backwards to open the inlet grid.
2. Hold the knob at the back of the intet grid and pull the suction grid
forward to remove.
3. Unscrew in the bottom cover as shown. Remove the end cap by
pulling up.
2
MW-6070045-1
Important
Ensure that the installation location is able to take four times the
unit weight and capable of bearing vibration for long periods.
Ensure the condensate can properly be drained. Install the unit
slightly sloped towards the drain tap.
1. Mount the fasteners of the indoor unit in one of the following ways:
with a dowel on which the suspension bolt is screwed.
with a suspension rod fixed directly on the hard structure (steel or
wood).
MW6020094-01
en
5 Installation
177
Publicidad
