Publicidad
Idiomas disponibles
Idiomas disponibles
5.10
Positioning the ducted unit
5.10.1
Installation location
Fig.202 Space requirements
300
Fig.203 Bottom side air inlet
Fig.204 Rear side air inlet
5.10.2
Suspending the unit
7800852 - v02 - 10052022
A ducted installation is conditioned to a plan.
100
200
MW-6020088-1
There are two installation methods to install the ducted unit :
For both installation types, it is necessary to move the air inlet plate.
Reattach this plate to the unused air inlet location. Check that the plate is
correctly fixed.
MW-6020086-1
MW-6020087-1
MW6020094-01
Choose an installation location where the structure is strong enough to
carry the weight of the ducted unit.
Make sure the desired location is within maximum allowable distances
for the refrigerant lines and electrical wiring.
Make certain to maintain proper clearances around the ducted unit.
Inadequate clearances may cause system freezing or temperature
control problems.
Make sure there are adequate clearances for future maintenance and
service operations.
Allow for access to the condensate pump and the electrical control box.
Bottom side air inlet
Rear side air inlet
Important
Ensure that the installation location is able to take four times the
unit weight and capable of bearing vibration for long periods.
Ensure the condensate can properly be drained. Install the unit
slightly sloped towards the drain tap.
1. Fix the suspension bolts.
en
5 Installation
179
Publicidad
