Publicidad
Idiomas disponibles
Idiomas disponibles
en
5 Installation
5.13.3
Connecting the units
Fig.218
Unit A
230V~
50Hz
L
N
MW-6070154-1
188
Unit B
Unit E
1. Connect the cables to the appropriate terminals, as shown in the
figure.
2. Correctly screw the cable clamps. Adjust the length of the cables
accordingly.
Use a suitable cable: power supply cables of parts of appliances
for outdoor use shall not be lighter than polychloroprene sheathed
flexible cable (design 60245 IEC 57).
Important
To avoid electric shock, make sure that the length of the
conductors between the traction arrester device and the terminal
blocks is such that the active conductors are put under tension
before the earth conductor.
Important
For wall mounted units:
Do not connect anything to L0.
Connect the S terminal to the outdoor unit C terminal.
7800852 - v02 - 10052022
Publicidad
