Yaesu MARK-V FT-1000MP Field Manual De Instrucciones página 97

S
ISTEMA DE
Parameter Bytes
Command
or Key
1st 2rd
Electronic
K1 K2
Keyer
EDSP
Enhanced
Digital – –
Signal
Plocessing
Manual de Instrucciones
C A
ONTROL SISTIDO POR
Opcode Command Chart (2)
Opcode
3rd 4th 5th
Activates remote control and contest keyer functions.
K1 = 00H ( fixed value )
K2 = keyer function:
K3 K4 70H
K3 = 01H ( fixed value )
K4 = 1BH ( fixed value )
EDSP Settings, where P2 is:
P1 P2 75H
C
OMPUTADORA
Parameter Description
00H = Message 0
01H = Message 1
02H = Message 2
03H = Message 3
04H = CQ/ID Message
05H = Contest Number
06H = Decrement Contest Number
07H = Increment Contest Number
08H = Message Playback m/o Tx
09H = Write Message into Memory
RX EDSP OFF ( 30H ) , P1 = 00H
AM EDSP Demodulation On ( 31H ) , P1 = 00H
USB EDSP Demodulation ( 32H ) ,
with audio response of 100 Hz ~ 3.1 kHz ( P1 = 00H ) or
300 Hz ~ 2.8 kHz ( P1 = 10H )
LSB EDSP Demodulation ( 33H ) ,
with audio response of 100 Hz ~ 3.1 kHz ( P1 = 00H ) or
300 Hz ~ 2.8 kHz ( P1 = 10H )
AF Filter Off ( 40H ) , P1 = 00H
AF LPF On ( 41H ) ,
where P1 = [ F ( Hz )] /20 ( HEX format )
CUTOUT
AF HPF On ( 42H ) ,
where P1 = [ F ( Hz )] /20 ( HEX format )
CUTOUT
CW 240 Hz BWF ( 45H ) ,
( BCD format )
where P1 = F
CENTER
CW 120 Hz BWF ( 46H ) ,
( BCD format )
where P1 = F
CENTER
CW 60 Hz BWF ( 47H ) ,
( BCD format )
where P1 = F
CENTER
Data Mode AF Filter On ( 48H ) , where P1 =
FSK ( 10H ) , SSTV ( 20H ) , Packet ( 30H ) , or FAX ( 40H )
Random Noise Filter ( 4AH) Off/On ( P1 = 00H/1YH )
Audio Notch Filter ( 4BH) Off/On ( P1 = 00H/10H )
AF Equalization ( 4EH), where P1 = Off ( 00H),
Bank 1 ( 10H), Bank 2 ( 20H), Bank 3 ( 30H), Bank 4 ( 40H)
TX EDSP Off ( B0H)
USB EDSP Modulation ( B2H), with audio response of:
100 Hz ~ 3.1 kHz ( P1 = 10H),
200 Hz ~ 3.1 kHz ( P1 = 30H),
LSB EDSP Modulation ( B3H), with audio response of:
100 Hz ~ 3.1 kHz ( P1 = 10H),
200 Hz ~ 3.1 kHz ( P1 = 30H),
AF Equalization ( C1H), where P1 = Off ( 00H),
Bank 1 ( 10H), Bank 2 ( 20H), Bank 3 ( 30H), Bank 4 ( 40H)
CAT
50 Hz ~ 3.1 kHz ( P1 = 20H),
300 Hz ~ 3.1 kHz ( P1 = 40H)
150 Hz ~ 3.1 kHz ( P1 = 20H),
300 Hz ~ 3.1 kHz ( P1 = 40H),
página 95