System Status In Kiwa Mode; Setting The E.bOx With Dip Switches; Activation Of The Set; Figure 50: System Status In Kiwa Mode - DAB E.Box Plus Instrucciones De Instalación Y Mantenimiento

8.13 System status in Kiwa mode

8.14 Setting the E.box with dip switches

If the E.box is provided with a display, it is recommended to use the display for configuration. Otherwise it is possible
to use the dip switches inside the panel and set them as shown in Figure 51.

8.15 Activation of the set

To activate the set it is necessary to enable the pumps. During the first configuration, for safety's sake, the
pumps are disabled and are OFF. To change to automatic mode, just briefly press the
pumps P1 and P2. As shown in Figure 52.
ENGLISH

Figure 50: System status in KIWA mode

Figure 51: Dip switches for KIWA pressure boosting

Figure 52: enabling P1 and P2

104
buttons on the