9 THE KEYPAD AND THE DISPLAY
Main display of the E.Box.
If it refers to a pump, the RESET Eliminate alarms key eliminates the errors of that pump.
If it is general, it eliminates the panel errors.
It allows you to choose the operating mode of the pumps P1 and P2. ON pump always on,
OFF pump always off. In AUTO mode the panel decides when to switch the pumps on or
off. To pass to ON mode, you must hold down the key for at least 3 seconds. When the
key is released, the pump returns to the previous mode.
ENGLISH
Figure 56: Label and keys
107