Key; Warnings; Responsibility - DAB E.Box Plus Instrucciones De Instalación Y Mantenimiento

KEY

The following symbols have been used in the discussion:
Situation of general danger. Failure to respect the instructions that follow may cause harm to persons
and property.
Situation of electric shock hazard. Failure to respect the instructions that follow may cause a situation of
grave risk for personal safety.

WARNINGS

Read this documentation carefully before installation.
Installation and operation must comply with the local safety regulations in force in the country in which
the product is installed. Everything must be done in a workmanlike manner.
Failure to respect the safety regulations not only causes risk to personal safety and damage to the
equipment, but invalidates every right to assistance under guarantee.
Skilled personnel
It is advisable that installation be carried out by competent, skilled personnel in possession of the
technical qualifications required by the specific legislation in force.
The term skilled personnel means persons whose training, experience and instruction, as well as their
knowledge of the respective standards and requirements for accident prevention and working conditions,
have been approved by the person in charge of plant safety, authorizing them to perform all the
necessary activities, during which they are able to recognize and avoid all dangers. (IEC 60730).
Safety
Use is allowed only if the electric system is in possession of safety precautions in accordance with the
regulations in force in the country where the product is installed. Check that the panel has not been
damaged.
In particular, check that all the internal parts of the panel (components, leads, etc.) are completely free from
traces of humidity, oxide or dirt: if necessary, clean accurately and check the efficiency of all the components in
the panel. If necessary, replace any parts that are not perfectly efficient.
It is indispensable to check that all the panel leads are correctly tightened in the respective clamps.
In the event of a long period of inactivity (or when any component has been replaced), it is advisable to
perform on the panel all the checks indicated by standard EN 60730-1.
Failure to observe the warnings may create situations of risk for persons or property and will void the product
guarantee.

RESPONSIBILITY

The Manufacturer does not vouch for correct operation of the electropumps or answer for any damage that
they may cause if they have been tampered with, modified and/or run outside the recommended work range
or in contrast with other indications given in this manual.
The Manufacturer declines all responsibility for possible errors in this instructions manual, if due to misprints or errors
in copying. The Manufacturer reserves the right to make any modifications to products that it may consider necessary
or useful, without affecting their essential characteristics
ENGLISH
67