CAMPAGNOLO NEUTRON Carbon Hub Manual De Uso página 39

6.2 - DISASSEMBLY AND ASSEMBLY OF THE REAR HUB
• Remove the sprocket set (Section 2 of the "Owner's Manual - PART 1).
• Using a stiff blade (such as small knife) positioned as indicated in fig. 30 and taking care not to damage the hub or the spo-
kes, remove the side covers from the hub (A - Fig. 30) from the hub.
• Unscrew the locking nut (B - Fig. 31) with a fully inserted 5 mm Allen wrench; counter the rotation of the axle with another
5 mm Allen wrench fully inserted on the opposite end of the axle itself.
• Align the screw (D - Fig. 32) of the lock ring (C - Fig. 32) with the groove (E - Fig. 32) on the hub body.
• Using a 2.5 mm Allen wrench, slacken the screw by 3 turns (D - Fig.33).
31
B
16
32
D
C
E
30
A
33
D