Hubs Adjustment - CAMPAGNOLO NEUTRON Carbon Hub Manual De Uso

7. HUBS ADJUSTMENT

• Using a stiff blade (such as small knife) positioned as indicated in Fig. 24 (page 14) and taking care not to damage the hub or the spokes, remove the side
covers from the hub.
• Align the screw (A - Fig. 42) of the lock ring (B - Fig. 42) with the groove (C - Fig. 42) on the hub body.
• Fully insert the 2.5 mm Allen wrench (D - Fig. 43) into screw (A - Fig. 43) and tighten it by about three (3) turns.
• To reduce axle clearance, tighten lockring (B - Fig. 43) by turning it clockwise by hand or with a 21 mm wrench.
42 43 A
B
X
A
OPEN
CLOSE
B
CLOSE
OPEN
C
D
21