CAMPAGNOLO NEUTRON Carbon Hub Manual De Uso página 40

• Unscrew and remove the lock ring (C - Fig. 34), press the axle (G - Fig. 34) towards the hub body, making sure that the free-hub body comes out of its seat; slide
out the axle axle-freehub body unit, remove the ring (F - Fig. 34), the cone (H - Fig. 34), the cone (I - Fig. 34), the gaskets (J - Fig. 34) taking care not to damage
it and the ball bearings (K - Fig. 34).
• If it is necessary to replace the cups, contact a Campagnolo Service Center.
• Carefully clean the components, grease the ball bearings and proceed to refit the system performing disassembly operations in reverse order.
Attention
When inserting the axle, be careful not to move the ball bearings out of their seats.
34
C F J H K K J I G
17