CAMPAGNOLO NEUTRON Carbon Hub Manual De Uso página 45

• To increase axle clearance, loosen lockring (B - Fig. 43) by turning it counter-clockwise by hand or
with a 21 mm wrench.
Strike screw (E - Fig. 44) lightly with the plastic handle of the Allen wrench.
• Tighten the Allen screw (A - Fig. 43) with the wrench properly seated on it until the gap (X - Fig. 43)
on the lockring (B - Fig. 43) is completely closed.
• Make sure that the adjustment is correct (the axle slides easily and without play), otherwise repeat
the adjustment procedure.
22
44
E