E2/8M Tx - EXFO FTB-8510B Guia Del Usuario

PDH Tabs

E2/8M TX

E2/8M TX
Press TEST, DSn-PDH, and E2 (under DSn-PDH TX).
Configuration
Framing: Select the framing that will be used for transmission. Choices are
Unframed and Framed. The default setting is Framed.
Alarm Generation
Type: Select the type of alarm to be generated. Choices are AIS, RAI, and
LOF. The default setting is AIS.
Note: Only AIS is available when the framing is set to Unframed.
On/Off button: Press On/Off to enable/disable the alarm generation.
381
SONET/SDH Application