Next-Generation Tabs
LCAS Sink
Hold-Off Timer
Note: Not available when Non-LCAS from the Remote DUT group is enabled.
Enabled: Allows enabling the Hold-Off Timer. This setting is disabled
by default.
Duration (s): Allows selecting the timer duration. Choices are from 0.1
to 10 seconds. The default setting is 1 second.
Wait-to-Restore Timer
Enabled: Allows enabling the Wait-to-Restore Timer. This setting is
disabled by default.
Duration (s): Allows selecting the timer duration. Choices are from 1
to 1000 seconds. The default setting is 300 seconds.
490
FTB-8100 Series Transport Blazer