Regenerator Section Oh Tx/Rx (Sdh) - EXFO FTB-8510B Guia Del Usuario

Regenerator Section OH TX/RX (SDH)

The Regenerator Section OH TX allows changing the regenerator
transport overhead information to be transmitted while the Regenerator
Section OH RX allows verification of the information received. Refer to
Glossary on page 577 for detailed overhead information.
Press TEST, RS-MS, and RS OH (under RS-MS TX/RX).
Regenerator Section Overhead
STM-1 Channel: Select the channel number that will be used for
verification. Choices are 1 for STM-1, 1 to 4 for STM-4, 1 to 16 for
STM-16, 1 to 64 for STM-64, and 1 to 256 for STM-256.
The following controls are available with SONET/SDH Intrusive through
mode only:
The Overwrite check box when selected, allows the generation of the
selected byte. The byte can be selected by clicking on its blue label.
The byte having its Overwrite check box selected will have its
hexadecimal value on a yellow background. A byte having its
hexadecimal value with a gray background cannot be overwritten.
The Overwrite LED indicates if there is any byte in any timeslot having
the Overwrite check box selected (LED is green) or not (LED is gray).
Disable All allows to clear the Overwrite check box for all bytes.
SONET/SDH Application
Regenerator Section OH TX/RX (SDH)
SDH Tabs
313