VCAT RX - Overview
Press TEST, VCAT and Overview (under VCAT RX).
Group Size
Group Size indicates the type and size of the VCG members as well as the
bandwidth used by the VCG group. For example STS-1-21v =
145.152 Mbps indicates STS-1 as the VCG type, 21v for the size, and
145.152 Mbps for the bandwidth of the VCG group.
LCAS Configuration
Allows enabling LCAS configuration. See LCAS - Source on page 468 and
LCAS Sink on page 481 for more information.
Note: Enable LCAS from TX and RX tabs are coupled.
SQ Controls
Apply ExSQ button: Validates and applies the ExSQ number for each
member. Available only when at least one SQ number has been
changed. Not available when Enable LCAS is enabled.
Resequence ExSQ button: Assigns SQ number sequentially following
the timeslot order. Not available when Enable LCAS is enabled.
Copy SQ to ExSQ button: Replaces the ExSQ with the SQ number. Not
available when Enable LCAS is enabled.
SONET/SDH Application
Next-Generation Tabs
VCAT RX - Overview
463