Indications For Use - Ottobock C-Leg Protector 4X860 Instrucciones De Uso

Knee Joint Combination Possibilities
Designation
C-Leg
Prosthetic Foot Combination Possibilities
Prosthetic foot
Designation
Triton
Triton Vertical Shock
Triton Low Profile
Triton Heavy Duty
Trias
C-Walk
Dynamic Motion
Adjust
Axtion
Lo Rider
INFORMATION
The foot cuff is not compatible with the slim footshells.
3 Application

3.1 Indications for use

The housing of the knee joint is protected against external influences by the protector, e. g.
scratching and surface contamination.
3.2 Area of Application
The product is intended exclusively for C-Leg users.
In principal, the product can be used with a rotation axis-floor-measurement* of 430 mm -
560 mm.
An exception is fittings with the 1C61 Triton Vertical Shock prosthetic foot. Due to the height of
the foot, the fitting area is restricted to 470 mm - 560 mm.
*Position of the alignment reference point of the C-Leg (rotation axis): 20 mm above the medial
tibial plateau.
Rotation axis-floor-measurement measured while standing (barefoot)
INFORMATION
For smaller users that require the Protector to be substantially shortened, the foot cuff material
can extend forwards into the area of the shield insert. The rotation axis-floor-measurement at
which this may occur depends on the foot cuff size being used.
3.3 Conditions of use
The product was developed for everyday use and must not be used for unusual activities such as
extreme sports (free climbing, paragliding, etc.).
3.4 Qualification
The fitting of patients with the product may only be carried out by qualified personnel (e.g. a pros­
thetist).
12 | Ottobock
Reference number
3C98-3/3C88-3
Reference Size S
number
1C60 24-25
1C61 24-25
1C63 24-25
1C64 24-25
1C30 23-25
1C40 24-25
1D35 23-25
1M10 23-25
1E56 23-25
1E57 24-25
Foot cuff
Size M Size L
26-28 29-30
26-28 29-30
26-28 29-30
26-28 29-30
26-28 29-30
26-28 29-30
26-28 29-30
26-28 29-30
26-28 29-31
26-28 29-31