Ottobock 17B203 E-MAG Active Instrucciones De Uso página 36

Installation instructions
INFORMATION
The marked casing support is essential for stability.
NOTICE
Risk of damage due to improper installation
Incorrect installation can cause malfunctions and / or damage to the knee joint. Please observe the following
safety instructions:
► Follow the instructions for use provided for the charger and batteries.
► Use the supplied dummies. Do not process joint or electronic components directly.
► Follow the installation instructions and the sequence of the individual steps (see Page 33).
► Only use the M5 x 10 screws included in the scope of delivery.
Carefully mill a cable groove in the joint guide (see fig. 15 / see fig. 16) and then reinsert the dummy for the knee
joint.
CAUTION
Risk of damage due to improper installation
Ensure that no notches are made in the joint bar material during milling since this creates predetermined breaking
points.
15
Measure the length of the accompanying cable dummies:
• Dummy for the cable between the knee joint and electronics (7 mm wide, see fig. 17)
• Perlon wire for the cable connecting the electronics to the battery (see fig. 18)
36 | Ottobock
16
17B203=* E-MAG Active