COOK Medical H-30 Manual Del Usuario página 27

Preset Buttons
• Touch one of the numbered presets to jump to its stored power parameters
• A preset button will be dark gray with a white number when active ,
as shown for preset #1. (See figure 6.)
• Touch the S button followed by a numbered preset button to store the power
parameters that are currently displayed
Adjustment Controls
• Adjust the highlighted orange setting (pulse energy, frequency or
visual aiming beam intensity)
• Up arrow increases setting
• Down arrow decreases setting
Information Bar
• Displays simple instructions, system status and error messages
Pulse Width Toggle Button
• Toggles between Short and Long pulse width modes
Standby Button
• Yellow bar and icon signals system is in Standby mode
• Touch to return to Standby mode
Visual Aiming Beam Button
• Touch to toggle on or off
• The icon will be white when on and gray when off
• Adjust intensity with the adjustment controls while highlighted orange
Ready Button
• Green bar and icon signals system is in Ready mode
• Touch to enter Ready mode
Cook Medical © 2012 Return to Table of Contents
Chapter 5
Operation
1-26