COOK Medical H-30 Manual Del Usuario página 31

• No fiber attached: The fiber is not connected or is connected incorrectly. Unplug and
then plug in the fiber correctly.
• Remote open: The remote connector, near the foot switch, is not connected or is
connected incorrectly. This error warning is displayed when the system is in Ready
mode. Connect remote.
• Pedal not connected: The foot switch connector is not connected or is connected
incorrectly. This error warning is displayed when the system is in Ready mode.
Connect foot switch.
• Energy < 80%: This warning appears when the output energy is less than 80% of the
set value. Call for service.
• Energy > 120%: This warning appears when the output energy is greater than 120%
of the set value. Call for service.
Cook Medical © 2012 Return to Table of Contents
Chapter 5
Operation
1-30