Nussbaum TOP LIFT 2.35 TS Instrucciones De Servicio página 80

Time frame Maintenance
type position
12
1
11
2
10
1 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
1 x / 12
9 3
4
8
5
7
6
80
Hydraulic hose lines
Storage and duration of use
Excerpt from DIN20066:2002-10
• For permitted loading, hoses undergo a natural change. This limits
the duration of use.
• Improper storage, mechanical damage and unpermitted loads are
the most frequent cause of breakdowns.
• The duration of use of a hose line including any storage time should
not exceed six years.
Hose lines are to be replaced if/when,
• Damage to the outer coating up to the insert (chafe marks, cuts,
cracks)
• The outer coating becomes brittle (crack formation)
• Deformation from the natural shape in the depressurised and pres-
surised conditions
• Leakage
• Damage or deformation of the mounting fixture
• Meandering of the mounting fixture
• The lifetime has been exceeded
Repair of the hose line using the implemented hose / mounting fixture
is not permitted.
Extending the replacement intervals given in the guideline is possible
if the inspection for safe-work condition is done in adjusted, shortened
time frames, if required and by competent personnel.
If there is an extension of the replacement interval, no situation may
occur which could result in injury of employees or other personnel.
Excerpt from BGR237:
Specifications for the hydraulic hose lines
Normal specification:
Recommended exchange intervals:
6 years (operation duration including max. 2 years storage time)
Increased demands e.g. by
• increased usage times e.g. multi-shift, short cycle times and pressure
impulses
• increased exterior and interior (due to media) influences which sig-
nificantly reduce the lifetime of the hose lines
Recommended exchange intervals:
6 years (operation duration including max. 2 years storage time)
OPI_TOP LIFT 2.35 TS TSK TSA - HYMAX INGROUND 2.35 R B P_V1.1_DE-EN-FR-ES-IT
Maintenance plan