Tractor Coupling - JF MIX 4000 CS Manual De Instrucciones

TRACTOR COUPLING

Choose a flat and levelled surface, since it makes
the procedure easier and safer.
1.
Approach the tractor to the Wagon carefully,
aligning the shaft bar with the machine
hitch.
2.
Put the hitch pin (B) and lock it with the
counter-pin (C)
NOTE!
In order to adjust the shaft bar height, use a
jack (D).
3.
After coupling, retract the jack (D), turn it
and put it in the rest position.
NOTE!
During the operation, the jack (D) should be at
working position (horizontal) – Check picture
beside.
The involuntary movement of the
machine during coupling might cause
an accident!
If it is impossible to perform the
coupling on a flat, leveled surface,
you should add shims to the wheels in
order to make the machine stationary.
After coupling, make sure that the
header is securely locked to the tractor's
shaft bar. Always lock it with a counter-
pin (C). The accidental uncoupling of
the Wagon, when it is being towed,
might result in a serious accident.
20
CAUTION!
Instructions Manual
B
JACK IN REST POSITION
C
D