Scale; Leveling For The Weighing - JF MIX 4000 CS Manual De Instrucciones

SCALE

The DG500 scale is equipped with three load
sensors, one buzzer and a display panel. In
order to take advantage of its several technical
resources and obtain its best performance, read
carefully the instructions manual that comes
with your Mixer Wagon.
The scale instructions Manual will guide
you through different interpretations of
the weighing system, the easiest ways, as
well as provide basic information, such as:
configuration, use of several accessories at your
disposal, a service of troubleshooting and safety
rules of this equipment.

LEVELING FOR THE WEIGHING

For accurate weighing, the Wagon must be
coupled to the tractor and leveled on both ways,
cross-sectional and longitudinal. It has been
projected to provide adequate leveling, without
the need of making any additional adjustments.
NOTE!
i ,
f necessary you can reposiTion The shafT bar
upwards or downwards
adequaTe leveling afTer you couple The TracTor
f ,
or The adJusTmenT
(a),
and bolTs from boTh sides of The header
NOTE!
d ,
ue To The weighT
winch or several people To lifT The header
,
so ThaT you obTain
you should remove The nuTs
iT will be necessary To use a
Instructions Manual
SCALE
LONGITUDINAL LEVELING
CROSS-SECTIONAL LEVELING
.
.
.
A
31