Practical Guide - JF MIX 4000 CS Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PRACTICAL GUIDE

Here we present the most common symptoms
of operating failures, their probable causes and
precautions you should take. In case there are
any other enquiries, find one of our Authorized
Dealers or get in contact with our Post-Sale
Department. It is going to be our pleasure to
help you with any assistance you might need.
SYMPTOM
- Rel ea se o f l ittle
material through the
discharge screw.
- Irregular unloading
- Feed troughs get full - Slow tractor speed
- Supply troughs
don't get filled up
- High temperatures of
bearings
- Very High working
temperature
48
PROBABLE
CAUSE
- Inadequate opening
of the discharge door.
- The tractor speed is
not compatible with
the unloading flow
- Excessive speed of
tractor
- Very low oil level
- Waste oil
- Bearings with defects - Consult an Authorized Dealer
- Very high oil level
- Waste oil
- Impurities in the oil
Instructions Manual
PROCEDURE
- Increase the opening of the
discharge door.
- Slow down the tractor, however,
keep an adequate rotation in the
PTO
- Increase tractor traveling speed
- Slow down the tractor
- Fill up the oil level
- Change the oil
- Check oil levels
- Change the oil
- Change the oil

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Mix 6000 cs

Tabla de contenido