Safety In Maintenance - JF MIX 4000 CS Manual De Instrucciones

are not familiar with its operations. Do
not allow them to approach the machine
when it is working.
ƒ In case you notice any abnormality in its
operation, vibrations, unusual noises etc.,
turn off the machine immediately, check
and eliminate the source before you turn
it back on.
ƒ Read carefully all the content in this
Manual before you couple the machine
to the tractor. It is very important to
learn how to use the Mixer commands
and become more familiar with them,
checking your control as well as verifying
the respective operating modes, in
accordance with instructions in this
Manual.
ƒ In order to work safely, the machine
must be operated by only one person,
who should be competent, of legal age,
and sitting on the driving position of the
tractor.
ƒ Check if the protections are properly
mounted and in their appropriate places;
if the stickers described are perfectly
legible before you put the machine in
operation.
ƒ The stickers found on the machine
provide a series of important indications:
Respecting the signals is a way to
safeguard your own safety.

SAFETY IN MAINTENANCE

ƒ Maintenance, inspections and repairs
can only be performed by a specialized
technician, who is aware of all risks
involved. It is necessary, therefore, to
check all operating procedures related
to the machine, which are adequate to
be sure of the methods to use when you
have to prevent dangerous
situations. The technician
must always work with
extreme caution, paying
maximum attention to all
safety standards.
ƒ Turn off the tractor PTO,
the engine and remove the
key from the ignition before
you regulate, lubricate or
perform any maintenance
services in the machine.
Never perform any repairs
or adjustments when the
machine is on.
ƒ Always put all hydraulic
controls of the tractor with
gear lever in neutral before
you turn it off or work on
the hydraulic system.
ƒ M a k e s u r e a l l s y s t e m s
components are kept in
good state.
ƒ R e p l a c e i m m e d i a t e l y
damaged, crushed or spoiled
hoses.
ƒ Make use of appropriate
protection on hands and
eyes when you check if there
are any high-pressure leaks
in the hydraulic system. Use
a piece of wood or a card
instead of using your hands
to isolate and identify .
Instructions Manual 9