Keyboard Shortcut Keys; Contrast Adjustment; Changing And Entering Values - Roxell RDC Manual Del Usuario

3.0 Keyboard Shortcut Keys

Press once on the shortcut key to enter the screen.
Fill provision and batch setup.
Feed consumption history.
Feeders.
Stop all/Reset.
Setup screen.

4.0 Contrast Adjustment

LCD Contrast Set Screen
The contrast of the display can be adjusted. To do so, go to the Main screen (press once
on Enter) then press once on the Program key
appears (see above).
To change the display contrast, press repeatedly on the forward key
contrast (lighten) or repeatedly on the back key

5.0 Changing and Entering Values

Two types of numbers appear on the display, those that are programmable and those that
are un-programmable and are intended for status display only. To change a
programmable number first use the shortcut keys to enter the desired screen.
Press once on the Program Key
number key pad to enter the desired numbers. Press on the Enter key
value in the systems memory. Once the number is stored it stops blinking. If two
programmable numbers appear in the screen, then when the Program key is pressed, the
first number blinks and can be changed. When the Enter key is pressed, the next number
starts to blink. Use the key pad to change it too and press Enter to save the new value in
the system's memory.
Roxell Daybin Controller – RDC
Alarms.
Scroll forward.
Scroll back.
Program key.
Enter.
LCD Contrast Set
Use  or 
, the value to be changed will start to blink. Use the
Page 8 of 193
. The LCD Contrast Set screen
to decrease (darken) the contrast.
to increase the
to store the