Technical Data; Operation - SATA spray master RP Instrucciones De Servicio

SATA spray master RPOperating Instructions
US
[1-13] Nozzle set
[1-14] Pressurized cup

7. Technical Data

Description
Recommended spray gun inlet
pressure
Max. spray gun inlet pressure
Max. air pressure
Max. cup pressure
Pressure in cup variable
Recommended spraying distance
Air consumption
Max. material temperature
Weight (without material) of 750 ml
aluminum gravity flow cup

8. Operation

Warning!
Risk of injury from bursting compressed-air hose
If unsuitable compressed-air hoses are used, excessive pressure can
damage them and cause them to burst.
→ Use only solvent-resistant, anti-static and technically sound hoses for
compressed air with resistance to continuous pressure of at least 10 bar,
leakage resistance of < 1 MOhm and a min. inside diameter of 9 mm
(# 9902).
Notice!
Damage due to contaminated compressed air
Use of contaminated compressed air can lead to
malfunctions.
→ Use clean compressed air. For example, through SATA filter 100
(# 148247) outside the spray booth or SATA filter 484 (# 92320) inside
the spray booth.
Before using observe/check the following points / to ensure safe operation
of the paint spray gun:
504
[1-15] Screw-on lid
150 - 230 Nl/min at 1 - 2 bar
RP
15 psi - 29 psi
145 psi
44 psi
25 psi
from 0 to 1.7 bar
6.7" - 8.3"
122 °F
45.9 oz.