Symbols; Product Description - Roger Technology B70/1DCHP Instrucciones Y Advertencias Para El Instalador

2

Symbols

The symbols and their meaning in the manual or on the product label are
indicated below.
Generic danger.
Important safety information. Indicates operations and
situations in which the personnel involved must pay close
attention.
Dangerous voltage risk.
Indicates operations and situations in which the personnel
involved must pay close attention to dangerous voltages.
Hot surfaces risk.
Indicates danger due to hot surfaces or which anyway have high
temperatures (risk of burns)
Useful information
Indicates useful information for the installation.
Refer to the Installation and use instructions.
Indicates the obligation to refer to the manual or original
document, which must be available for future use and must not
be damaged in any way.
Protective earth connection point.
Indicates the admissible temperature range.
Alternating current (AC)
Direct current (DC)
Symbol for the product disposal according to the WEEE directive,
see chapter 22.
3

Product description

The B70/1DCHP 36 V digital control unit uses a high resolution encoder for the sensored power control of ROGER
sliding gate leaf automation systems.
Ensure that the parameter A1 is set correctly. If this parameter is not set correctly,
the automation system may not function properly.
ROGER TECHNOLOGY cannot be held responsible for any damage or injury due to improper
use or any use other than the intended usage indicated in this manual.
We recommend using only ROGER TECHNOLOGY accessories and control and safety devices. Speci cally, we
recommend installing F4ES or F4S series photocells.
For further information, refer to the installation manual of the BG30 automation
system
55