IKUSI TM70 Serie Manual De Instalación Y De Utilización página 197

22.2- A) OPERATING MODE WITH T70/1 and T70/2 TRANSMITTER MODELS WITH DLA OPTION.
The positions in which the binary rotary swtches can be assembled are the right ones that are not used for
programming mode (programming a spare part / changing the base cannel frequency)
(Prohibited positions: 1, 2 4,6, ON/OFF, START/KLAXON)
ACTIVATING THE BINARY POSITION / SELECTING A MANEUVER
With the transmitter in OFF state, realease the STOP pushbutton and then select the desired switch position
and press START/HORN pushbutton.
Always with the transmitter in ON state, select another rotary position (decimal position -> decals and/or units
from 0 to 99 maximum with 2 rotary swiches), and then pressing or validating it with START/HORN pushbutton.
The display will show graphically the selected number of the rotary position and/or the associated text (for
example: "13" or "Gate 13")
To choose another position (do not switch OFF the transmitter), select another position and press
START/HORN pushbutton (the display will show the new slected position).
NOTE: DUE TO SECURITY REASONS, if the transmitter is switch OFF, pressing the STOP mushroon,
the transmitter only will start up in the last rotary position the transmitter worked. If the rotary position
is modified, the transmitter will not start, until the last position is recovered. (Example: If the transitter is
switched OFF in position 13, and the user changes to position 9 the transmitter will not start in the
position 9)
EDITING TEXT IN THE DISPLAY (máximum 32 texts):
Instead of displaying the corresponding rotary postion number (1, 5, 13...) it is posible to edit text and/ or to mix
alphanumeric characters, with the limit of 2 lines and 12 characters in each line. (Example; Pos. 1 -> "1" in the
display and "Oven 1" in the display)
22.2 – B) ) OPERATING MODE WITH T70/1 and T70/2 TRANSMITTER MODELS WITHOUT DLA OPTION
Main differences in the oprating mode comparing with Transmsitters with DLA OPTION
- To make a change to a new rotary position and to valídate it, it is not necessary to press START/HORN
pushbutton. The secure operating mode feature disappears.
- If the transmitter is switched off by pressing the STOP mushroom, it is not necessary to start again in
the last used working position.
- The specific DLA option features are not available.
- Using 2 binary rotary switches limited to 10 physical positions each one, and with the aid of the
numerichal marking (0–15), up to 99 positions can be identified using units and tens values.
TM70Bi V4.1 (03/12) 1121174.pdf
IKUSI reserves the right to modify this information without prior notification.
87