Main Characteristics - IKUSI TM70 Serie Manual De Instalación Y De Utilización

23.1- MAIN CHARACTERISTICS

400-500MHz Antenna
Connector
It requires internal or
external antenna in the
receiver
TR400-800CE-EMB: 418/433/446/447/865/870/915/918 MHz radio models with embedded antennas.
TR400-800CE-CMX: 335/418/433/447 MHz radio transceiver with external connector and 865/870/915/918
MHz radio transceiver with external connector. The specification is the same as the TR400-800CE-EMB radio
except the output power which is conducted –CMX case- and radiated –EMB case-.
The design is prepared to be fitted with embedded antennas (assembled as SMD devices in the PCB) or with
external connectors; in this case using 50 Ohm external antennas.
TM70Bi V4.1 (03/12) 1121174.pdf
IKUSI reserves the right to modify this information without prior notification.
868-960MHz Antenna
Connector
It requires internal or
external antenna in the
receiver
Restrictions of use
Transmitters (T70/X)
None
Receivers (R70/XX)
1) Using a single transceiver in the radio
2) Using 2 transceivers in the radio
Radio range test (26/05/2011)
Up to 250 meters with the transmitter placed on the floor
Frequency working range:
400 – 464MHz
800 – 928MHz
Without expansions: Rx (x1) internal antenna
With expansions: Rx (x1) A70 external antenna
Without expansions: Rx (x1) internal antenna +
Rx(x1) external A70 antenna
With expansions: Rx (x2) A70 external antennas
89