IKUSI TM70 Serie Manual De Instalación Y De Utilización página 208

In case of assembling some manipulators or selectors and the PO is not required to be maintained,
furthermore of removing the corresponding bridge to the digital maneuver the PO coming from the hall effect
sensors must also be removed.
For this purpose there are two options:
1- To remove/cut the bridge which drives the PO siganl of all the selectors and manipulators placed in the
PCB
2- To remove the SMD resistor corresponding to the maneuver which we do not want to actívate the PO
signal
M10 M6
M12
Option 1 – Bridge (M2,M4,M6,M8,M10,M12)
TM70Bi V4.1 (03/12) 1121174.pdf
IKUSI reserves the right to modify this information without prior notification.
PO signal of the sensors acting as manipulators/selectors
M8
M4
SMD resistors
M2
98