Generac 20 kW Synergy Guia De Instalacion página 51

Active Alarm LED
STEPPER RED
OVERCUR-
RENT
MISWIRE RED
OVERVOLTAGE RED
LOW BATTERY YELLOW
BATTERY YELLOW
PROBLEM
CHARGER YELLOW
WARNING
SERVICE A YELLOW
SERVICE B YELLOW
Inspect Battery YELLOW
Installation Guidelines for Air-Cooled Generators
Table 8-2. Generator Diagnostics (Continued)
Problem
Unit will not start in AUTO with
utility loss.
Unit will not start in AUTO with
utility loss.
Unit will not start in AUTO with
utility loss.
Yellow LED illuminated in any
state.
Yellow LED illuminated in any
state.
Yellow LED illuminated in any
state.
Yellow LED illuminated in any
state.
Yellow LED illuminated in any
state.
Yellow LED illuminated in any
state.
Things to
Check
Check the Contact servicing dealer.
LEDs/Screen
for alarms.
Check the Contact servicing dealer.
LEDs/Screen
for alarms.
Check the Contact servicing dealer.
LEDs/Screen
for alarms.
Check screen Clear alarm. Navigate to the BATTERY
for additional MENU on the control pad LCD. Contact
information. servicing dealer if battery is GOOD.
Replace battery If CHECK BATTERY is
displayed.
Check screen Contact servicing dealer.
for additional
information.
Check screen Contact servicing dealer
for additional
information.
Check screen Perform SCHEDULE A maintenance.
for additional Press ENTER to clear.
information.
Check screen Perform SCHEDULE B maintenance.
for additional Press ENTER to clear.
information.
Check screen Inspect battery. Press ENTER to clear.
for additional
information.
Troubleshooting
Solution
45