Tempo Ultra Ata66 Installation - Sonnet Tempo Ultra ATA66 Manual De Instalación

En
Support Note:
make a backup of important information
on your system's current hard drive(s) prior to
installing new hardware or software. When han-
dling computer products, you must take care to
prevent components from being damaged by
static electricity. Always ground yourself by touch-
ing a metal part of the computer such as the
power supply's metal case and work in an area
free of static electricity; avoid carpeted areas.
Handle the Tempo only by its edges, and avoid
touching connector traces and component pins
on PCI cards, hard drives, and other IDE devices.

Tempo Ultra ATA66 Installation

To install the Tempo Ultra ATA66, follow these steps:
1. Shut down computer.
2. Remove the case cover from computer.
3. Remove the Tempo and Ultra ATA66 cable
from packaging materials.
4. Determine the number of hard drives that are
going to be installed inside your computer
with the Tempo. (See page 1-3, "Ultra ATA66
Cable/Drive Configurations" for further
information.)
Support Note:
(one with data on it already) is connected
to the Tempo Ultra ATA66, you must initialize the
drive for your system to recognize it. Since all data
will be erased, make a backup if necessary prior to
connecting the drive to the Tempo.
We recommend you
When an existing drive
2-2