Troubleshooting Guide - Sonnet Tempo Ultra ATA66 Manual De Instalación

Chapter 7

Troubleshooting Guide

Problem: Hard drive(s) connected to the Tempo
do not mount (appear on the desktop).
Possible Solutions:
1) Hard drives must be initialized before they will
mount. Refer to Chapter 6, "Hard Drive
Initializing," for more information.
2) Your hard drive's jumpers may be improperly
configured. Refer to Chapter 1, "Configuring and
Connecting Your Hard Drive," for complete
information about reconfiguring the jumpers on
the jumper block of your drive(s).
3) The Ultra ATA66 cable(s) may not be connected
to the Tempo or hard drive(s) properly. Refer to
"Getting Started" and the sections entitled "ATA
Cables Compared," and "Ultra ATA66
Cable/Drive Configurations" for complete infor-
mation about connecting hard drives to the
Tempo.
4) The Ultra ATA66 cable may have been damaged
when you installed it. Follow the direction you
used for opening the computer, then examine
the cable for any signs of damage, including
crimping and piercing. If the cable is damaged,
you should replace it.
7-1