Publicidad
CONNECTOR CHECK
Description
Insufficient connector contact.
NOTE
If the defect persists after these checks, repair the connector and check again.
BATTERY CHECK
Description
Insufficient contact.
Insufficient charge.
NOTE
If the defect persists after these checks, repair/change the battery and check again.
SENSOR CHECK
Description
Speed sensor.
Fuel sensor.
Coolant thermistor.
Oil level sensor.
NOTE
If the defect persists after these checks, change the sensor and check again.
Check
Repeat the removal/reinstallation of the connector for many times.
Slightly pull the wiring.
Remove the connector and check the terminals (for example, for folds, deformations, rust,
non-genuine components, etc.).
Check
Make sure that the terminals are connected correctly.
Make sure that the battery has been installed.
Measure charge values (V), see pag. 175.
Measure specific density, see pag. 175.
Check
See p. 199.
See p. 201.
See p. 203.
See p. 198.
197
Area 51
Publicidad
