Operating Safety - Mitel MIVOICE OFFICE 400 Manual Del Usuario

WARNING!
Warning indicates a potentially hazard-
ous situation which, if not avoided, could
result in death or serious injury.
CAUTION!
Caution indicates a potentially hazardous
situation which, if not avoided, may
result in minor or moderate injury and/or
damage to the equipment or property.
Notice:
Address practices not related to personal
injury. Failure to observe information
identified in this way can lead to equip-
ment faults or malfunctions or affect the
performance of the system.
These symbols may appear on the product:
The lightning flash with arrowhead sym-
bol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilat-
eral triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product
Indicates ESD components. Failure to
observe information identified in this way
can lead to damage caused by electro-
static discharge.
The ground symbol within a circle identi-
fies the product to be connected to an
external conductor. Connect this product
to earth ground before you make any
other connections to the equipment.

Operating safety

MiVoice Office 400 communication servers are
operated on 115/230 VAC mains power. Com-
munication servers and all their components
(e.g. telephones) will not operate when mains
power fails. Interruptions in the power supply
will cause the entire system to restart. A UPS
system has to be connected up-circuit to
ensure an uninterruptible power source. Up to a
6
specific performance limit a Mitel 470 commu-
nication server can also be powered redun-
dantly using an auxiliary power supply. For more
information please refer to your communication
server's system manual.
When the communication server is started for
the first time, all the configuration data is reset.
You are advised to backup your configuration
data on a regular basis as well as before and
after any changes.
Installation and operating instructions
Before you begin with the installation of the
MiVoice Office 400 communication server:
• Check that the delivery is complete and
undamaged. Notify your supplier immedi-
ately of any defects; do not install or put into
operation any components that may be
defective.
• Check that you have all the relevant user doc-
uments at your disposal.
• Configure this product with only the assem-
blies specified and in the locations stated in
the user documentation.
• During the installation follow the installation
instructions for your MiVoice Office 400
product in the sequence that is given and
observe to the safety warnings they contain.
CAUTION!
Failure to follow all instructions may
result in improper equipment operation
and/or risk of electrical shock.
• Install all wiring according to local, state, and
federal electrical code requirements.
• Do not connect telecommunications cabling
to the system, service the system, or operate
the system with the grounding conductor dis-
connected.
• Ensure the AC receptacle is installed near the
equipment and easily accessible.
• Use only Mitel approved power adapters.
Any servicing, expansion or repair work is to be
carried out only by trained technical personnel
with the appropriate qualifications.