Blackmagic Design Ultimatte 12 Manual De Instrucciones página 44

Inputs
‚ BG In
‚ Layer In
‚ BG Matte In
‚ Garbage Matte In
‚ Holdout Matte In
‚ Layer Matte In
You can also create up to 4 custom monitor out buttons. These can be set to show your favorite
views in the order of your choosing.
To configure a custom monitor output button:
1 In the 'matte' settings, tap on the 'custom monitor out' soft button in the groups Section.
2 Tap on the 'configure' soft button in the groups section.
3 In the dialog box, tap on any of the tabs labeled MONITOR OUT 1, 2, 3, and 4.
4 From the drop down menus, choose which of the following potential
monitor outputs you would like to assign to each of the buttons.
‚ Program
‚ FG In
‚ BG In
‚ Combined matte
‚ Internal matte
‚ Fill Out
‚ Layer In
‚ Background matte in
‚ Garbage Matte In
‚ Holdout Matte In
‚ Layer matte in
‚ Processed L M. Layer matte with adjustments applied.
‚ Processed H M. Holdout matte with adjustments applied.
‚ Processed G M. Garbage matte with adjustments applied.
‚ Processed B M. Background matte with adjustments applied.
‚ Screen correction capture. Image captured and used for screen correction function.
NOTE You do not necessarily need to assign a function to each button.
If 'none' is chosen, that button will simply appear blank.
5 Tap on 'apply' to save your choices.
To load a custom monitor configuration, tap on 'custom monitor out' in the groups
section, and then tap on one of the custom monitor buttons.
Changing Settings 44