2) Pictogram definitions
In this manual, the following terms are used:
"Operator": Person or department in charge
of management and safe use of the product
for the purpose for which it is intended.
"Installer": Person or department in charge of
assembly of the components of the product
received, installation of the product for use,
disassembly, dismantling, and transport for
storage and shelving.
GB
"Technician": Qualified person who is skilled
and familiar with the product, and who is in
charge of the maintenance operations
described in this manual.
"After-sales service":
Company or department authorized by a
company of the Tractel
service or repair operations on the product.
"
DANGER": Indicates remarks inten -
ded to avoid injury to persons which may be
mortal, serious or minor.
"
IMPORTANT": Indicates remarks
intended to avoid a failure or damage to the
product, equipment or environment, but not
directly endangering the life or health of the
operator or any other persons.
"
NOTE": Indicates remarks relative
to precautions to be followed to ensure
efficient and comfortable installation, use and
maintenance, with no implication of damage
or injury.
®
group for after-sales
Read the user manual. This
symbol must be present on the product, and
indicated in the "Markings" section.
Enter the information in the
inspection and maintenance sheet.
3 Presentation
3.1 Conditions and composition of
standard delivery
The
altotir™
winch
comprises:
1. A plastic bag containing: 2 clamps for
mounting on tube (Fig. 1, item 8) and
4 clamping nuts (Fig. 1, item 14).
2. A plastic bag containing a CE statement
along with this user manual.
3. The winch, comprising:
• A control unit (Fig. 1, item 16)
• A power connector (Fig. 1, item 20)
• A lifting wire rope (Fig. 1, item 1)
equipped with its lifting hook (Fig. 1,
item 2)
NOTE:
comprising all the items of the standard
product composition must be compared
against the order.
3.2 Product definition
3.2.1 Definition
intended use
The altotir™ winch is an electric drum winch.
It is designed for vertical load lifting by an
electric motor-driven winch. The winch is
designed to be manually transportable.
The winch is usually used as follows:
• Winch mounted on scaffolding jib crane,
itself secured to scaffolding (Fig. 10)
• Mounted on frame.
Other utilization configurations are detailed in
the sections which follow:
4
standard
delivery
Any
delivery
not
of
product
and