Sliding Dishwasher Into Cabinet Opening - Signature Kitchen Suite SKSDW2402P Manual Del Propietário

CAUTION
• When connecting the dishwasher water
supply line to the house water supply, sealing
tape or compound should be used on pipe
threads to avoid leaks. Tape or compound
should not be used on compression fittings.
• Connect the dishwasher to a hot water
supply with a temperature range between
120 °F (49 °C) and 149 °F (65 °C). This
temperature range provides the best washing
results and shortest cycle time. To prevent
damage to dishes, the temperature should
not exceed 149 °F (65 °C).
• Water supply pressure must be between 20
psi and 80 psi (140–550 kPa). If the water
supply pressure exceeds 80 psi, a pressure
reducing valve must be installed. Otherwise
premature failure of the inlet valve may occur.
Sliding Dishwasher into
Cabinet Opening
CAUTION
• Do not pull or lift the dishwasher using the
door . Doing so can damage the door and
a
hinges.
• Do not push the door of the dishwasher
with knees when sliding the dishwasher into
position. Doing so can damage the front
cover.
• Do not push the top of the dishwasher. Doing
so can damage the interior of the dishwasher.
INSTALLATION 17