Control Panel - Signature Kitchen Suite SKSDW2402P Manual Del Propietário

32 OPERATION

Control Panel

Power
a
• Press the Power button to turn power on
and off.
• After the cycle is complete, the power
automatically turns off for purposes of
safety and economy.
• If there is a power surge, power outage,
or disruption of any kind, power is
automatically turned off for safety.
• When power is connected again, it will turn
on automatically and resume the cycle.
Display
b
• 8: 88: Digital Display
− The digital display on the control
panel shows the ESTIMATED cycle
time. When the cycle and options are
selected, the display shows the total
estimated time to complete those
selections. During operation, the display
shows the remaining estimated operating
time.
NOTE
− The estimated time shown on the display
does not include delay times for heating
water, etc.
− If Delay Start is selected, the display
shows the delay time in hours.
− Cycle time may vary depending on the
soil level of your load.
: Control Lock
• CL
− The Control Lock feature helps prevent
settings from being changed during a
cycle. Selecting this feature locks all of
the buttons, except for the Power button,
on the control panel. This feature does
not lock the door.
− While a cycle is running, press and hold
Delay Start for three seconds to activate
or deactivate Control Lock.
− To start a new cycle, deactivate Control
Lock.
: Rinse Aid Icon
• e
− This icon illuminates when the rinse aid
level is low. The LED automatically shuts
off when the rinse aid is refilled or the
level is set to 0.
− Refer to the Rinse Aid Dispenser
Adjustment section.
:Machine Clean
•
− This cycle is for cleaning the inside of the
dishwasher. Use the cycle without dishes
in the machine. It eliminates residual
soils, odor, white spots, and other dirt.
Add citric acid or another cleaning agent
for more effective results.
− Press and hold Heavy for three seconds
to activate.
NOTE
− The Machine Clean
every 30 cycles. To activate or deactivate
the icon, press the Delicate button for
three seconds.
f
: Wi-Fi
•
− When the appliance is connected to the
internet through a home Wi-Fi network,
this icon illuminates.
− Press and hold Remote Start for
approximately three seconds to connect
to the network.
icon flashes