Smart Diagnosis™ Feature - Signature Kitchen Suite SKSDW2402P Manual Del Propietário

50 SMART FUNCTIONS
Smart Diagnosis™ Feature
This feature is only available on models with the
or icon.
Use this feature to help you diagnose and solve
problems with your appliance.
NOTE
• For reasons not attributable to
SIGNATURE KITCHEN SUITE's negligence, the
service may not operate due to external factors
such as, but not limited to, Wi-Fi unavailability,
Wi-Fi disconnection, local app store policy, or
app unavailability.
• The feature may be subject to change without
prior notice and may have a different form
depending on where you are located.
Using SIGNATURE KITCHEN SUITE
to Diagnose Issues
If you experience a problem with your Wi-Fi
equipped appliance, it can transmit troubleshooting
data to a smartphone using the SIGNATURE
KITCHEN SUITE application.
Launch the SIGNATURE KITCHEN SUITE
application and select the Smart Diagnosis feature
in the menu. Follow the instructions provided in the
SIGNATURE KITCHEN SUITE application.
Using Audible Diagnosis to
Diagnose Issues
Follow the instructions below to use the audible
diagnosis method.
Launch the SIGNATURE KITCHEN SUITE
application and select the Smart Diagnosis feature
in the menu. Follow the instructions for audible
diagnosis provided in the SIGNATURE KITCHEN
SUITE application.
1
Place the mouthpiece of the phone close to
the Smart Diagnosis™ icon. Do not press
any other buttons.
2
Press and hold Download Cycle until a
countdown displays on the appliance.
3
Keep the phone in place until the tone
transmission has finished. The display will
count down the time. Once the countdown
is over and the tones have stopped, the
diagnosis will be displayed in the application.
NOTE
• For best results, do not move the phone while
the tones are being transmitted.
Remote Start
Use a smart phone to control the appliance
remotely or check to see how much time is left in
the cycle.
Using Remote Start
1
Load the dishes into the dishwasher.
2
Press the Power Button.
3
Make sure that the Wi-Fi is connected.
4
Press the Remote Start button and close the
dishwasher door to enable the Remote Start
function.
5
Start a cycle from the SIGNATURE KITCHEN
SUITE application on your smart phone.
NOTE
• Once the Remote Start mode is enabled, you
can start a cycle from the Signature Kitchen
Suite smartphone application. If the cycle is not
started, the machine will wait to start the cycle
until it is turned off remotely from the application
or the Remote Start mode is disabled.
• The door must be closed in order to activate the
Remote Start mode.
• If you press Start after pressing Remote Start,
the Remote Start function will be disabled.
Disabling Remote Start
While Remote Start is activated, open the
dishwasher door or press the Remote Start button
twice quickly with the door closed.
Download Cycle
Download new and specialized cycles that are not
included in the standard cycles on the appliance.
Appliances that have been successfully connected
can download a variety of specialty cycles specific
to the appliance. Only one cycle can be stored
on the appliance at a time. Once cycle download
is completed in the appliance, the appliance
keeps the downloaded cycle until a new cycle is
downloaded.