Signature Kitchen Suite SKSDW2402P Manual Del Propietário página 23

With the lower rack removed, place a level on the
inside wall of the tub to check that the dishwasher
is level from side to side.
• If you do not have a level, try using a
smartphone level application instead.
Make sure that the gap between the tub walls and
the door liner is the same on either side.
Adjusting Leveling Feet
Adjust as needed until the dishwasher is
completely leveled.
Adjusting Front Leveling Feet
• Use a flat-blade screwdriver to turn the front
leveling feet and adjust the front of the tub.
• Turn the front leveling feet clockwise to raise the
front of the tub and counterclockwise to lower it.
• The adjustments work identically for both front
leveling feet.
If a flat-blade screwdriver is unavailable, use a
1/4" square drive wrench(
a
wrench( ) with 1/2" socket(
b
leveling feet and adjust the front of the tub.
Adjust the front and rear leveling legs until they
are all in firm contact with the floor. Failure to level
the dishwasher may prevent the door from closing
properly and the dishwasher will not turn on.
INSTALLATION 23
Max 2 3/8 "
(60 mm)
) or 3/8" square drive
) to turn the front
c