Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Technical data
Burner characteristics
Packaging
Burner characteristics
IME and AGP (Multi-Stage Injection
and Proportional Air/Gas) dual fuel,
monoblock burners C120, C160 and
C210 are blast-air units with low gas
pollution discharge (low NOx).
They either operate on liquid or gas
fuel, via TC control panel manual
changeover switches. Optional remote
control is available.
- Liquid fuel : Fuel oil with 1.6 to 6
2
mm
/s - viscosity, at 20°C (cSt), and
calorific value (H
of 11.86 kWh/kg.
i)
They operate at three progressive
rates, via stages.
- Gas fuel : Gases found in enclosed
table, subject to the appropriate
supplied gas and pressure and
according to natural gas H
i
variations. They operate at two
progressive rates or modulating, in
conjunction with PI or PID power
regulator.
Depending on the cabling for the
boiler/burner control circuit, 2 or 3
operating speeds may be used (see the
electrical diagram).
They are suited to generators meeting
EN 303.1 Standard requirements.
Three fixed combustion head lengths
are available (T1-T2-T3). The LFL1.333
control and safety unit operates for
intermittent service (less than
twenty-four hours).
Packaging
The burner is delivered on a pallet, in
three packages, weighing between 121
and 126kg, depending on the model.
Burner body :
integrated electrical plate,
–
motor-driven pump,
–
documentation folder containing :
–
– operating instructions,
– wiring and hydraulic diagrams,
– boiler house plate,
– guarantee.
fuel oil hydraulic connection :
–
– two 1.50m long hoses with
mounted connectors,
– one 1.30m long hose without
connector.
Combustion head :
boiler front seal, one bolt bag, two
–
hinge shafts, electric bundle
connected to fuel oil valves.
Gas manifold :
collector valve set
–
28
contractual
05/2006 - Art. Nr. 13 013 500B
Publicidad
Capítulos
Tabla de contenido
