Control Panel Tc - Cuenod C 120 Instrucciones De Montaje

Start-up
Functions

Control panel TC

Control panel TC
All control elements can be seen from
the outside.
A transparent removable lid, clipped on
cover, provides access to various
controls and commands that enable to
set, then operate burner.
Control panel TC also includes an
ionization power point, two green
indicators showing type of fuel used
and the control circuit protective fuse.
To remove lid, press one side or both
sides of s and pull towards you to free
it.
To put lid back, place in casing and
press both clips in.
42 05/2006 - Art. Nr. 13 013 500B
TC
TC Switch functions
A2 Standardized positions 48x48mm
or 48x96mm for power regulation
(optional)
B10 Flame current measuring bridge
[µA DC], located under TC
F10 TC fuse
Green indicators
H1 FUEL OIL fuel
H4 GAS fuel
S1 TC main switch
0 Power off
1 Power on green indicator
H10 light on
S2 Operation mode selection switch
Auto Local automatic mode
K
Manual mode
S3 Operates coupled with switches
S29J - S2K
+/- Flow increase/decrease
S4 Operates coupled with switches
S29J - S2K
Selection of fuel oil fuel or gas fuel
S7 and S8
Operates coupled with switches
S29J - S2K
Manual selection of fuel oil stages
S7.1 Ignition flow and 1st stage
S7.2
+ 2nd stage flow
S8.2
S7.2
+ Nominal air flow and 3
S8.2
S29 Control location selection switch
J
Local mode
H
Remote control mode
SA1 The control unit displays :
- program cycle,
- faults : red light illuminated
and reset pushbutton
rd
stage
(option)