Final Assembly Instructions - Harbor Breeze ANIVA BAY Manual Del Usuario

FINAL ASSEMBLY INSTRUCTIONS

1. Remove one of the two preassembled
shoulder screws in the hanger bracket (B).
fully removing it. Then, rotate ceiling canopy
(D) so second shoulder screw moves into the
small opening of the keyslot. Tighten shoulder
screw and re-install the previously removed
shoulder screw to secure ceiling canopy (D) to
hanger bracket (B).
WARNING
To avoid possible fire or shock, make sure the
electrical wires are completely inside the canopy
housing and not pinched between the housing
and the ceiling.
2. Securely attach and tighten the canopy
screw cover (E) over the shoulder screws in
the hanger bracket (B), utilizing the keyslot
twist-lock feature.
3. Remove the preassembled screw from the
blade cover (I) on motor assembly (A). Repeat
for remaining blade covers (I). Retain the
screws for next step.
Note: Make sure to keep loose hardware
separate to avoid confusion during installation.
1
2
3
11
E
D
A
I