Care And Maintenance; Troubleshooting; Corrective Action - Harbor Breeze ANIVA BAY Manual Del Usuario

CARE AND MAINTENANCE

When cleaning, use only a soft brush or lint-free cloth to avoid scratching the finish.
WARNING
Do not use water when cleaning the ceiling fan. It could damage the motor or the finish and
create the possibility of electrical shock.
and secure.

TROUBLESHOOTING

WARNING
Turn off main power before attempting any troubleshooting.
PROBLEM
Fan will not start.
Fan sounds noisy.
Fan wobbles
excessively.
POSSIBLE CAUSE
1. Fuse or circuit breaker blown.
2.
to the fan.
3. Dead battery in remote control.
1. Blades not attached to fan.
3. Wire connectors inside housing are
rattling.
4. Motor noise caused by solid state
variable speed control.
1. Set screw in downrod support is
loose.
1. Check main and branch circuit
fuses or circuit breakers.
2. Check line wire connections to
fan.
3. Replace with new battery.
1. Attach blades to fan before
operating.
2. Check to make sure all screws
in motor housing are snug
(do not overtighten).
3. Check to make sure wire
connectors are secured tightly
inside housing.
4. Some fan motors are sensitive
to signals from solid-state
variable speed controls.
Solid-state controls are not
recommended; choose an
alternative control method.
1. Tighten set screws securely in
downrod support.
16

CORRECTIVE ACTION