Harbor Breeze ANIVA BAY Manual Del Usuario página 15

OPERATING INSTRUCTIONS
4. The remote from the remote pack (K) has been
programed from the factory to work with your fan.
If you are installing more than one fan and do not want
the fans to interfere with each other, you will need to
follow these steps for this fan:
a) Inside the battery compartment, slide dip switch to "1"
and turn fan power OFF. Restore power to the fan.
two musical sounds, indicating the power supply is
normal.
b) Within 30 seconds of hearing the musical sounds,
of remote to synchronize it with the fan.
To verify successful synchronization, the ceiling fan light
will blink 3 times and remain ON, and the fan will rotate
on HIGH speed.
5. Remote functions:
Fan speed:
The fan speed from 1-6, with 1 being the lowest and
6 being the highest
= Natural breeze
:
indicator.
Reverse button:
Summer- Slide switch to the left and fan runs
counterclockwise. The airflow with normal
rotation cirulates cool air.
Winter- Slide switch to the right and fan rotates
clockwise. The airflow with reverse rotation
forces warm air downward.
:
Turns the fan and light off after 1 minute.
During light delay mode, press any other key
to cancel the function.
Home Shield:
The fan is turned off with the light in the A-B-A cycle.
During home shield mode, press any other key
to cancel the function.
Sleep Timer:
2H: The fan will turn off after 2 hours.
4H: The fan will turn off after 4 hours.
8H: The fan will turn off after 8 hours.
During sleep timer mode, tap the power
button to cancel the function.
.
dimming.
.
2 4
a
5
p
.
15
Remote
b
12V
2H
Remote