Fan Operation; Care And Maintenance - Harbor Breeze POINT BREAK Manual Del Usuario

FAN OPERATION

1. The fan pull chain (located to one side) has four positions to
control fan speed. One pull is HIGH, two is MEDIUM, three is
LOW and four turns the fan OFF. [Fig. 1]
2. Pull the light pull chain (located in the middle) to turn the light
ON or OFF. [Fig. 2]
3. Use the fan reverse switch, located on the switch housing (D),
to optimize your fan for seasonal performance. [Fig. 3]
Note: Wait for fan to stop before moving the reverse switch.
3A. In warmer weather, counterclockwise movement of the fan
will result in downward airflow creating a wind chill effect.
[Fig. 3A]
3B. In cooler weather, clockwise movement of the fan will
result in upward airflow that can help move stagnant, hot air
off the ceiling area. [Fig. 3B]

CARE AND MAINTENANCE

At least twice each year, lower canopy (B) to check downrod (A) assembly, and then tighten all screws on the fan.
Clean motor housing (E) with only a soft brush or lint-free cloth to avoid scratching the finish. Clean blades (H) with
a lint-free cloth. You may occasionally apply a light coat of furniture polish to wood blades for added protection.
Important: Shut off main power supply before beginning any maintenance. Do not use water or a damp cloth to
clean the ceiling fan.
TROUBLESHOOTING (continued on next page)
Warning: Before beginning work, shut off the power supply to avoid electrical shock.
Problem
Fan does not move.
Noisy operation.
Possible Cause
1. Reverse switch not engaged.
2. Power is off or fuse is blown.
3. Faulty wire connection.
1. Blades (H) are loose.
2. Cracked blade (H).
3. Unapproved speed control.
Corrective Action
1. Push switch firmly either way.
2. Turn power on or check fuse.
3. Turn power off. Loosen canopy (B) and
check all connections.
1. Tighten all blade screws (M).
2. Replace blade (H).
3. Replace with an approved speed
control device.
9
Fig. 1
Fig. 2
D
Fig. 3
Fig. 3A
Fig. 3B