54 Smart Functions - Signature Kitchen Suite SKSCV3002S Manual Del Propietário

54 SMART FUNCTIONS

SMART FUNCTIONS
SIGNATURE KITCHEN SUITE
Application
The SIGNATURE KITCHEN SUITE application
allows you to communicate with the appliance using a
smartphone.
SIGNATURE KITCHEN SUITE
Application Features
SpeedClean™
Allows you to set SpeedClean™ alerts, read the
instruction guide, and simulate and compare energy
consumption when using SpeedClean™ versus self-
clean cycles.
This feature is only available for lower oven.
Smart Diagnosis™
This function provides useful information for
diagnosing and solving issues with the appliance
based on the pattern of use.
Settings
Allows the user to change oven settings, including
the hour mode, preheat alarm light, beeper volume,
temperature units, convection auto conversion,
thermostat adjustment and language.
Remote Start
Remotely start the preheat mode or turn off the oven.
After opening and closing the door, place the mode
dial back to Remote Start within 30 seconds.
This feature is only available for lower oven.
Monitoring
This function provides the current status, remaining
time, cook settings and end time on the smartphone.
Push Alert
Turn on the push alerts to receive updates on the
status of the appliance. The alerts are sent whether
or not the SIGNATURE KITCHEN SUITE app is
running.
Timer
You can set the timer from the app.
This feature is only available for lower oven.
NOTE
• If you change your wireless router, Internet
service provider, or password, delete the
registered appliance from the SIGNATURE
KITCHEN SUITE application and register it
again.
• This information is current at the time of
publication. The application is subject to change
for product improvement purposes without
notice to users.
• This feature is only available on some models.
Before Using SIGNATURE KITCHEN
SUITE App
1
Use a smartphone to check the strength of
the wireless router (Wi-Fi network) near the
appliance.
• If the distance between the appliance and the
wireless router is too far, the signal strength
becomes weak. It may take a long time to
register or installation may fail.
2
Turn off the Mobile data or Cellular Data on
your smartphone.
• For iPhones, turn data off by going to Settings
→ Cellular → Cellular Data.
3
Connect your smartphone to the wireless router.