Changing The Oven Light; Removing And Replacing The Oven Door - Signature Kitchen Suite SKSCV3002S Manual Del Propietário

66 MAINTENANCE

Changing the Oven Light

The oven light is a standard 25-watt halogen bulb.
WARNING
• Make sure that the oven and bulb are cool.
• Disconnect the electrical power to the oven at
the main fuse or circuit breaker panel. Failure
to do so can result in severe personal injury,
death, or electrical shock.
• Wear gloves while changing the oven light.
Glass fragments from broken bulbs can cause
risk of injury.
• Gently twist the screwdriver blade while
changing the oven light. If you apply force, the
glass or oven may crack.
To replace lamps located on the side wall:
• Make sure oven and bulb are cool.
1
Unplug oven or disconnect power.
2
Remove oven racks.
3
Slide a flat blade screwdriver between the
housing and the glass light cover.
4
Support the glass light cover with two fingers to
prevent the cover from falling to the bottom of the
oven.
Glass Light Cover
Flat blade screwdriver
5
Gently twist the screwdriver blade to loosen the
glass light cover and remove it.
Housing
6
Remove bulb from socket.
7
Replace the bulb, and snap the light cover back
into place.
8
Plug in oven or reconnect power.
Removing and Replacing the Oven
Door
CAUTION
• The door is very heavy. Be careful when
removing and lifting the door.
• DO NOT lift the door by the handle. The handle
is not designed to support the weight of the
door and could break.
• DO NOT hit the glass with pots, pans, or any
other object.
• Scratching, hitting, jarring or stressing the glass
may weaken its structure, causing an increased
risk of breakage at a later time.
Removing the Oven Door
1
Fully open the door.
2
Unlock the hinge on both sides, rotating them as
far toward the open door frame as they will go.
Slot
Hinge lock
Hinge arm
3
Firmly grasp both sides of the door at the top.
4
Close the door to the removal position
(approximately 5 degrees) which is halfway
between the broil stop position and fully closed.
If the position is correct, the hinge cams will
move freely.
Removal Position
5
Lift door up and out until the hinge cams are
clear of the slots.
Lock
Unlock
about 5°